• Vermeer adds Max Line of grinder tips

    Vermeer adds Max Line of grinder tips
    Vermeer is enhancing its grinder tip line with the introduction of long-lasting
max grinder tips. They contain the maximum amount of carbide to provide durability grinder operators can count on, which translates into more time on the job and less time spent changing tips. These durable grinder tips are designed for a precise fit, eliminating the time required for modifying tips to fit your Vermeer grinder. “
Many grinder owners prefer to use a more premium product and spend less time changing out tips,” said Vermeer Recycling and Forestry Product Manager Jeff Bradley. “In most cases, changing tips can take anywhere from an hour to two hours.” Designed to extend the time between change-outs, max grinder tips will be included on the duplex drum with a purchase of a horizontal or tub grinder.

    “Grit options help determine the useful life of the grinder tips. Vermeer now sells three grit coverage options—max, premium or pro—to match the life of the cutter tips to the application,” said Bradley.
    “The max grinder tips deliver the longest life,” added Bradley. “The premium grinder tips feature additional welds on the ends and a single weld on the sides for an extended life span. Pro grinder tips have both ends and sides welded to provide a standard life span. The difference is the amount of carbide that is put on during the welding process. The max has a higher carbide content, which results in longer wear life.”
    A solution to match every application
    The three grit options can be paired with different grinder tip styles to match jobsite requirements. Six tip styles are available.
      •Wide block grinder tips are the most common in the industry. They can be used for several applications, such as land clearing materials, regrind, pallets, compost and green waste. “This is a more generalized tip,” noted Bradley. “Other types of tips are designed for specific applications where they really shine.”
       •Abrasion-resistant (AR) grinder tips are used when highly abrasive material is being processed. Their flat-face design, infused with tungsten carbide crystals in the casting block, is best suited for job sites with sand, dirt and other highly abrasive materials. “From a life perspective, it will tremendously outperform the standard wide block grinder tip in these applications, but materials must be free of contaminants.”
        •Wing grinder tips have a unique design with an overlay of carbide that provides an effective solution for processing large-diameter woody material. A narrow center section helps the tip penetrate the log, then the wings clean out the remainder. “Traditionally, on a horizontal grinder, the wing-tip design really allows penetration into the big woods,” said Bradley. “You’re taking a narrower chunk out of the material, which is easier to process. The narrow tip goes through the wood and splinters it a lot easier. You see productivity gains by using the wing-tip design in logs and big wood.”
        •Impact-resistant (IR) grinder tips offer an alternative to wing tips and are used to process large-diameter material. Their carbide inserts are very hard. “These tips give increased longevity when you have occasional rocks,” said Bradley.
       •Narrow block grinder tips have an overlay of carbide along the sides of the block, making them an effective solution for processing large-diameter woody material. “Depending upon your material type — if you’re doing stumps, if you’re doing big wood — that narrow tip really has a better processing capability,” said Bradley. “It’s productive and will get through the material quickly.”
       •Sharp grinder tips are precisely designed for cutting. They’re most commonly used on large-diameter wood for maximized production and a low amount of fines. With a sharp leading edge, these tips are not recommended for high contamination.
    With the addition of the max grinder tips, there are now more options to match cutting tips to the specific application while extending the time between change-outs.

    Leave a Reply

    Your email address will not be published. Required fields are marked *