Achieving improved productivity and worker accountability
Building landfills has become more complex and technologically sophisticated. Gone are the days when a smart owner could manage a site by pushing dirt over collected refuse. Back then, measurements were close approximations and quality was achieved through the skills and experience of the heavy-equipment operator.
Today, contractors and project owners expect more. Speed, exacting accuracy, productivity and quality long-life results are the expectation. Construction machines are more technologically advanced and sophisticated software creates project plans, manages the work and documents the results.
“Amidst the expensive, often difficult to learn, advanced technology is a simple and effective tool for building and maintaining landfills,” said John Miller, owner of JCM Excavating, Allendale, MI, and inventor of the JohnnyBall® 3D level and slope measuring system. “The JohnnyBall is mounted inside the operator’s compartment and is designed to allow operators to quickly check if their machine is at true level to then ascertain slope and grade. The mechanical device requires no electronics, batteries or satellites. It uses a compass-like design where the inner ball has industry-standard level and slope indications printed on it and the outer ball carries a stationary dot to indicate the true attitude of the machine — providing a 3D level and slope perspective at a glance.”
Miller believes the JohnnyBall provides the accountability that can help both the experienced operator perform better and the new machine operator get over the initial “new-kid learning hump” to gain comfortable proficiency and high production.
“Training is crucial for our success as a landfill, since many of our employees come from varying types of backgrounds,” stated Jason Turville, operations supervisor at Trans-Jordan Cities Landfill, South Jordan, Utah. “Our construction process is very specific and so most of our new hires have to be taught from scratch.”
Most Trans-Jordan machine operators are hired from outside the industry and have had no landfill experience. Generally, the new employee is mature, between 30 and 50 years old, and will have real-world equipment experience from various construction-type companies. Experience can vary from well seasoned to some with experience on only one machine type.
Training is a constant at Trans-Jordan, since there are many aspects to learn about processing municipal solid waste (MSW). Because some challenges do not happen that often, the company management uses the atypical as a chance to show the less experienced how to handle it.
For basic training, Trans-Jordan uses some instructional materials produced by the equipment manufacturers, the Solid Waste Association of North America (SWANA) and the Utah Safety Counsel. They conduct classroom training and a lot of hands-on training. Each division of job type has a trainer associated with that skill, typically the supervisors who themselves are experienced experts in all aspects of the landfill.
When asked why training is important, Turville responded, “Training is needed to ensure all our employees are on the same page and doing things consistently the same way. Processing 1,500 tons a day of MSW takes teamwork and coordination. In order to keep it safe and productive, training is the key ingredient. Training is also needed to ensure that new employees are doing the job as we expect of them rather than some other way they did somewhere else. For example, we compact the trash in a very specific way in order to get the best possible compaction. This process has taken much refinement through the years and is crucial to our success.”
Key to Trans-Jordan’s technical skills field training is the JohnnyBall 3D level and slope measuring system. Why is JohnnyBall so important?
“We purchased our first JohnnyBall merely to help aid the operators achieve true machine level, but then we quickly realized how it can help new operators who don’t quite understand or know what different slope angles look and feel like,” Turville said. “On a daily basis, we expect our working face to be a 4:1, with side slopes of 3:1. The JohnnyBall has been instrumental in teaching this technical requirement that we expect of all our operators. A 4:1 working face is ideal for the best compaction, based on how we run our operation, and the JohnnyBall holds them accountable by showing consistent, accurate feedback.”
Turville cited one employee who especially benefited from JohnnyBall training: “We had one guy who was maintaining the tipping face of the active landfill too steep and it was making the job really hard on him. Once we got him comfortable with the JohnnyBall and he realized the correct slope, he was able to use it to learn the correct steepness for the best compaction. He was clearly happier and more productive using JohnnyBall in his daily production!”
Before Trans-Jordan began using JohnnyBall for training and its daily heavy production, employee field training was “painful,” according to Turville. It was not only very time consuming, but required a second individual watching the employee while they were learning, to give constant feedback on the operator’s performance.
“We expect our operators to be comfortable and proficient with all of our equipment,” Turville said. “With a new operator, we start them with running the compactor because that is a core machine to our business. Compactors are ‘the money maker,’ and must be the piece of heavy equipment that can be operated by everyone.”
After compactor training, Trans-Jordan will slowly integrate the newbies into the other machines, which are also equipped with JohnnyBall 3D level and slope measuring systems. Their philosophy is that everyone should have good skills on all equipment, so they can be rotated through that equipment, keeping them interested and fresh, plus ensuring that they always have skilled operators available to get any job done correctly.
In the end, does proper training result in improved company productivity, and how does training affect the worker who is trained?
“For our operation, the best MSW compaction is achieved with 4:1 working face and a 3:1 side slope, using our two Cat 836K Landfill Compactors working together,” stated Turville. “We achieve maximum productivity by using our prescribed working order and that method ensures that we do get the best compaction. And the JohnnyBall provides the accountability.
“When our operators are working the landfill tipping face and gaining the compaction necessary, they can feel it while operating and verify by glancing down at the JohnnyBall. We think that having an expectation and giving the operators the tools to meet that expectation helps the operator to be successful and improves personal satisfaction. A successful operator shows pride in their work, feels accomplished at the end of the day and is motivated to continue to improve.”
Jeff Winke is a business and construction writer based in Milwaukee, WI. He can be reached through firstname.lastname@example.org.