Sensing-Saf-Start from Rockford Systems protects machine operators from accidental re-starts following power interruptions

Sensing-Saf-Start from Rockford Systems protects machine operators from accidental re-starts following power interruptions
ROCKFORD, IL— Drills, mills, lathes, grinders, saws and other dangerous machinery can abruptly shut down during operation due to an unscheduled power interruption. When an unintended shutdown takes place, it is critically important that the machine does not automatically restart, catching the operator by surprise and leading to a serious accident. 

 
In the event of a power interruption, the Rockford Systems Sensing-Saf-Start automatically disconnects power to the machine so that when power is restored the machine will not restart. It is only after the reset button has been safely pressed by the machine operator on the Sensing-Saf-Start that the machine can be restarted and normal operation resumed. 
 
Designed for fast, simple retrofits, the Sensing-Saf-Start helps to bring older machines into alignment with current safety regulations and standards, in addition to possibly even sparing the user the expense of purchasing a new machine. It is also ideal for replacing old, frayed or ungrounded power cords. The Sensing-Saf-Start can be installed on many different types of machines that are driven by small motors operating on 120V AC, and are connected to a power source by means of 14-gauge, 3-wire flexible cord.
 
The Rockford Systems Sensing-Saf-Start can be purchased as a package (SAFS-200) that includes a 20″ cord for the machine end and an 8′ cord with molded plug on the power end, plus an E-stop in a NEMA-4 polycarbonate enclosure, or can be purchased individually (SAFS-100) without the E-Stop.
 
The Sensing-Saf-Start complies with OSHA requirements, the Canadian Electrical Code, and NFPA 79 and ANSI B11 series electrical standards. 
 
For more information, visit www.rockfordsystems.com

Leave a Reply

Your email address will not be published.