CDE launches new 500tph ComboTM X900 at CONEXPO-CON/AGG

CDE launches new 500tph ComboTM X900 at CONEXPO-CON/AGG

CDE — manufacturer of wet processing equipment for materials processors, recently unveiled its new 500 ton per hour (tph) ComboTM X900 at CONEXPO-CON/AGG in Las Vegas, NV.

The X900 is the latest in CDE’s range of revolutionary ComboTM all-in-one wet processing and water management solutions. The ComboTM was first launched in Europe at bauma in April 2019. With an increased capacity of 500tph, the new ComboTM X900 is the largest in the series to date.

It has been engineered specifically for materials processors in North America and Latin America, as Kevin Vallelly, director of engineering at CDE, explained. “With our new ComboTM X900, we’ve doubled its capacity and created a next-gen solution for materials processors across North America and Latin America.

“The ComboTM X900 can process 500 tons per hour of feed material, including natural sand and crushed rock containing unwanted clay, silt and other organic contaminants to extract quality in-spec washed and graded sand products that are market-ready straight from the belts.”

As well as its increased capacity, the control cabin of the new Combo™ X900 has been repositioned to sit on top of the water tank, a design decision Vallelly says is directly influenced by the North and Latin American markets.

“In these regions, plant and machinery are subject to major temperature extremes and fluctuations,” he said.

“By positioning the control cabin on top of the water tank we’re able to better protect the operational heart of the plant and offer a solution that can be adopted throughout both North America and Latin America where high and low temperature extremes are recorded.”

Furthermore, where traditional washing systems typically have a separate standalone water tank, the new ComboTM X900 has integrated this into the design of the AquaCycle thickener tank resulting in a peripheral wall for water storage, which has significantly reduced the overall footprint.

It provides customers with almost total independence of water supply and minimizes the requirements for costly site engineering due to its significantly smaller footprint which is, on average 30% smaller than other traditional wash plant setups.

Vallelly says, “Traditional washing systems would typically consume up to 15 times more water than that required for the Combo™ X900. Our best-in-class water management and on-board water recycling minimizes costly water consumption and ensures up to 90% of process water is recycled for immediate recirculation through the closed-circuit system.”

He added, “The Combo™ X900 enables materials processors to wash more than 500tph with only 800gpm (gallons per minute), about the same amount of water that would be required to wash a truck.”

With its single chassis design, the Combo™ X900 incorporates all essential processes – washing, dewatering, water recycling and stockpiling – onto one single interconnected and pre-assembled unit.

A plug-and-play system — it arrives on site pre-wired and pre-tested — ready to process material within just five days as a standalone plant or as part of a larger turnkey solution.

Its single chassis design means the ComboTM X900 is portable and can be rapidly deployed or relocated to remote locations with minimal foundations and pipework. Coupled with its significantly reduced footprint, the ComboTM X900 is also ideal for compact quarries in urban settings.

The ComboTM X900 offers a solution to the challenge of growing urbanization in North America and Latin America.

“The urbanization challenge requires a technological and sustainable solution,” said Vallelly. “The ComboTM X900 maximizes resource yield from natural sand and crushed rock feed, adding huge commercial value and minimizing waste, and it ensures not one grain of value is lost to settling ponds.

“In North America, demand for sand and gravel is over 1.1 billion tons, including the 980 million tons in the US and 173 million tons in Canada. In South America, including Mexico, the value of imported sand is estimated to be over USD $86.1 million.”

Vallelly continued, “We’re supporting our customers to extend the life of their quarries through more efficient and sustainable technologies by extracting value in the form of manufactured sand from what was previously categorized as a waste by-product, by ensuring maximum product yield from resources and by boosting profitability through highly efficient processes.”

Leave a Reply

Your email address will not be published. Required fields are marked *